AMBERSIL MOULD RELEASE AGENTS

NON-Silicone Release agents

FORMULA 5 (NON-Silicone Release agent)

Multi-purpose, Light Duty release agent

• Silicone-FREE DRY FILM for release of fine detail plastic and rubber mouldings
• Particularly effective for injection moulding and vacuum forming processes
• Does not build up in the mould
• Operational up to 150 deg C
• Will Not interfere with post moulding treatments e.g. painting, plating or sticking
• Avoids surface marking
• Clean and colourless
• Improves surface finish
• Reduces rejects and increases production

NON-Silicone Release agents

FORMULA 7 (NON-Silicone Release agent)

Multi-purpose, heavy duty release agent

• Silicone-FREE heavy duty film for release of Plastic and Rubber mouldings
• Particularly effective for injection moulding and vacuum forming processes
• Does not build up in the mould
• Operational up to 170 deg C
• Will not interfere with post-moulding treatments e.g. painting, plating and sticking
• Clean and colourless
• Improves surface finish
• Reduces rejects and increases production

NON-Silicone Release agents

DP100 (NON-Silicone Release agent)

For Polyurethane Foams

• Silcone-FREE heavy duty release agent
• Especially effective in releasing polyurethane foams
• Also suitable for a wide range of plastics
• Provides an attractive matt finish
• Does not build up in the mould
• Will NOT interfere with post-moulding treatments e.g. painting, plating, sticking
• Operational up to 150 deg C
• Improves surface finish
• Reduces rejects and increases production

SILICONE Release Agents

FORMULA 9 (SILICONE Release agent)

Silicone Emulsion Spray

• A unique water-based Silicone Emulsion spray
• Ideal for foundry and Lost Wax Casting, also (where fast carrier evaporation is not important) for plastic and rubber moulding, sewing, foam converting and upholstery applications
• Improves surface finish and increases production
• Good heat resistance (Up to 150 deg C)
• Solvent free, low odour, clean and inert
• Does not build up in the mould
• Operational up to 150 deg C

SILICONE Release Agents

FORMULA 6 (SILICONE Release agent)

Multi-purpose, medium duty release agent

• Provides a general purpose, medium duty film for plastic and rubber mouldings
• Quick, easy and economical to use
• Improves surface finish
• Reduces rejects, and increases production
• Does not build up in the mould
• Operational up to 200 deg C

Mould Release / Lubricants

EJECTOR PIN LUBRICANT

Heavy duty lubricant for ejector pins

• Clear, non-staining lubricant
• Withstands extremes of pressure and loading
• Operational up to 120 deg C
• Will not fling off
• Displaces moisture and protects against corrosion
• Effective as a heavy duty lubricant in all engineering applications